ADXL202 سنسور شتاب دو محوره

تخفیف ویژه

GENERAL DESCRIPTION The ADXL202/ADXL210 are low cost, low power, complete 2-axis accelerometers with a measurement range of either ±2 g/±10 g. The ADXL202/ADXL210 can measure both dynamic acceleration (e.g., vibration) and static acceleration (e.g., gravity). The outputs are digital signals whose duty cycles (ratio of pulsewidth to period) are proportional to the acceleration in each of the 2 sensitive axes. These outputs may be measured directly with a microprocessor counter, requiring no A/D converter or glue logic. The output period is adjustable from 0.5 ms to 10 ms via a single resistor (RSET). If a voltage output is desired, a voltage output proportional to acceleration is available from the XFILT and YFILT pins, or may be reconstructed by filtering the duty cycle outputs. The bandwidth of the ADXL202/ADXL210 may be set from 0.01 Hz to 5 kHz via capacitors CX and CY. The typical noise floor is 500 µg/√Hz allowing signals below 5 mg to be resolved for bandwidths below 60 Hz. The ADXL202/ADXL210 is available in a hermetic 14-lead Surface Mount CERPAK, specified over the 0°C to +70°C commercial or –40°C to +85°C industrial temperature range.

FEATURES

2-Axis Acceleration Sensor on a Single IC Chip Measures Static Acceleration as Well as Dynamic Acceleration

Duty Cycle Output with User Adjustable Period Low Power <0.6 mA

Faster Response than Electrolytic, Mercury or Thermal Tilt Sensors

Bandwidth Adjustment with a Single Capacitor Per Axis 5 mg Resolution at 60 Hz Bandwidth

+3 V to +5.25 V Single Supply Operation 1000 g Shock Survival

APPLICATIONS

2-Axis Tilt Sensing

Computer Peripherals

Inertial Navigation

Seismic Monitoring

Vehicle Security Systems

Battery Powered Motion Sensing

دانلود دیتاشیت :

http://www.alldatasheet.com/datasheet-pdf/pdf/48921/AD/ADXL202.html